SMART Series Optical Fiber 1-Color Infrared Pyrometer

1. Product introduction

SMART-F series one color infrared pyrometer is a series of high performance and intelligent one-color infrared pyrometer. It consists of lens, fiber optics and processing components. Fiber optic can bear high temperature up to 250℃ and do not need additional cooling. It has strong casing, use stainless steel lens(with air purge functions), die cast aluminum housing, protection grade is IP54.

It use the manual adjustable focal lens, achromatic lens combination, high reliability circuit design (low temperature drift, fully digital measurement design, high integration SOC chip application, visualization OLED operation interface) and software design (ambient temperature compensation, real-time signal processing, abnormal signal processing, software code optimization in all kinds of application environment).These special designs enable SMART-F series one-color pyrometer to meet the use in a variety of harsh industrial sites and precise temperature control requirements.

SMART-F series one-color pyrometer determine the temperature of an object by receiving the sum of the narrow-band radiation energy emitted by the object. It adopts advanced hardware and software design, has a super wide dynamic range, and has high stability.

It can be widely used in metallurgical industry (wire rod, hot rolled plate,forging) and forging industry, heat treatment, induction heating, monocrystalline silicon and polycrystalline silicon,etc. SMART-F series is not only suitable for general industrial occasions of temperature measurement, but also suitable for installation in occasions with strong electromagnetic interference and high environmental temperature.

2. Product features

◆ Temperature measurement range covers 300℃～3000℃ ◆ Temperature measurement accuracy can reach 0.5% ◆ The repeat accuracy is 2℃ ◆ Response time 5ms～99.99s, adjustable ◆ Temperature resolution 0.1℃ ◆ Adjustable focus lens or fixed focus lens is used ◆ Laser aiming is used to clearly show the position and size of measured target ◆ Detector adopts PID constant temperature control to eliminate the influence of ambient temperature on the measurement accuracy ◆ Specially designed narrow-band infrared color filter minimizes the influence of the emissivity on the detector ◆ Industrial-grade OLED screen is used as the display interface, and the man-machine interface is friendly ◆ Abundant peripheral interfaces: 2 independent analog output, 2 alarm output, 1 level output and RS485 communication interface ◆ Software and hardware watchdog, hardware EMI filtering and other designs improve system stability, and can resist 2500VDC pulse group interference ◆ Supports up to 26 pyrometers in bus cascade, and realizes networked control via PC

3、Technical parameters

4. Wiring table

Multiple Analog Output：（4～20）mA,（0～20）mA,（0～5）V,（0～10）V alternative，default（4～20）mA. PNP output is dirty lens alarm output. Analog output and input power are isolated from each other. RS485 is isolate from input power.

5. Optical path diagram

S1 corresponds to F=75:1, S2 corresponds to F=150:1, S3 corresponds to F=200:1

6. Display interface

7. Outline drawing of SMART-F optical fiber one-color infrared pyrometer

8. Other installation accessories

(1) Water cooling plate

（2）Steering mechanism

9. Model definition

For example: SMART-FS-6016-L3 stands for a pyrometer which temperature measuring range is 600℃～1600℃, the fiber length is 3m, and use silicon photocells as detector.